What they publish
Recent posts 25 Profile posts 0 posts Last month 0% Members-only
6 of 25 previews capturedCaptured 6 distinct previews versus 25 public posts, with 5 rows in the latest crawl.
Video Latest post PublicRotary Broach Plans Here are the plans for the rotary broach as I built it in the video.
May 22 0 likes 0 comments.HAL and .INI files for LinuxCNC I've been asked if I would share these, so here they are. Article Sep 22, 2025 Public 0 0Turret macro for Boxford lathe/LinuxCNC A couple of people asked for this in the comments of the YouTube video, it's easier to post it here. This code is linked to the turret input button and runs each time you press the button. Video Mar 11, 2025 Public 0 2Stepper motor end cap (Nema 23) STL file People have asked if I could make the files available for the 3D printed stepper motor end caps I made in my most recent video, so here they are. There is a left and a right with the cable exit on different sides. The threaded hole is M20 and will fit a standard cable gland. You will need 4x M3 bolt 30mm long to attach to the back of the motor (You'll probably have to shorten the motor bolts by about 5mm). Video Mar 30, 2024 Public 0 0Terminator forearm cuff (modified design) This is based on the drawings provided by Andrew Smith (Conqueror Worm). I've modified it to roll up into more of a cone shape and then the top edges can be bent inwards to better match the correct overall shape. Note that the files are in metric units. Article Jan 13, 2024 Public 0 0Metacarpal Jig for Terminator hand (right hand) Somebody asked for plans for the jig I made to hold the metacarpals in position while I welded them to the carpal plate, so here it is. Article Jul 3, 2023 Public 0 0